Non Soluble Cutting Oils are high performance mineral-oil-type, non-staining cutting oils. They contain a balanced selection of additives that maximizes performance. They meet the anti-weld and lubricity requirements of moderate machining operations on most alloys. These cutting oils do not stain either ferrous or nonferrous metals during cutting operations and, likewise, will not stain after machining
Non Soluble Cutting Oil 3 is a light-colored, low-odor cutting oil. It is intended primarily for high-speed, deep-hole drilling and boring of all nonferrous metals. It also is recommended for the general machining of free-machining alloys magnesium and free-machining brass, bronze and phosphor bronze as well as high-speed light-feed machining of screw stock steels In addition, it can be used as a lubricating oil for certain high-speed spindles.
Non Soluble Cutting Oil 5 is primarily a dual- or tri-purpose cutting oil for automatic screw machine shops. It may be used as a cutting oil and/or a lubricating oil. It offers high lubricity and maximum cooling on hard, clean-cutting metals This makes it especially suitable for high surface speed machining of screw stocks, aluminum, and brass. It also can be used for the general machining of nickel-tin-bronze alloys and the free-machining of steels, as well as for severe cutting operations of difficult-to-machine non-ferrous alloys, including silicon-copper, silicon-bronze, and copper-nickel
Non Soluble Cutting Oil 10 is a heavy-duty, medium-viscosity, dual- or tri-purpose cutting oil. It offers superior cutting performance on free-machining stocks as well as tough metals, even in severe machining operations. It is an anti-mist oil and will not stain nonferrous metals. It is recommended for all kinds of grinding operations, including heavy-duty grinding of stainless steels and high-alloy steels. It reduces wheel loading, extends wheel life improves finishes, andlowers operating temperatures
Non Soluble Cutting Oil 3 is intended primarily for high-speed, deep-hole drilling and boring of a nonferrous metals it also is recommended for the general machining of free-machining alloys, magnesium and free-machining brass bronze, and phosphor bronze as well as high-speed light-feed machining of screw stock steels
Non Soluble Cutting Oil 5 is primarily a cutting oil for automatic screw machine shops. It may be used as a cutting steels, as well as for oil and/or a lubricating oil. It is especially suitable for high surface speed machining of screw stock aluminum, and brass It also can be used for the general machining of nickel-un-bronze alloys and the free machining of severe cutting operations of difficult-to-machine non-ferrous alloys, including silicon-copper, icon-bronze, and copper nickel
Non Soluble Cutting Oil 10 is recommended for free-machining stocks as well as tough draggy metals, even in severe machining operations it is recommended for all kinds of grinding operations, including heavy-duty grinding of stainless steels and high-alloy steels
